Conducted Immunity Test Systems

Frankonia Germany EMC Solutions GmbH

Frankonia Germany is recognized as a highly specialized technology corporation for EMC anechoic chambers and test systems within the automotive and industrial sector for testing of electromagnetic compatibility.

Frankonia is the preferred supplier for complete solutions when it comes to the implementation of EMC test facilities. We plan, coordinate, and define customized solutions with and for our customers that meet todays and future standards. Because of our commitment to provide turn-key EMC lab solutions we offer outstanding expertise in conducted immunity test system solutions for the following standards:

CIT-100

The CIT-100 is a complete test system for conducted RF-immunity testing and BCI-testing acc. to IEC/EN 61000-4-6, ISO 11452-4, MIL-STD 461, CS114 and similar standards.

The system consists of a built-in:

• Signal generator, 4kHz – 1.2 GHz
• RF-Power-Amplifier. max 4kHz – 400 MHz, 25 / 75 W
• 3-Channel RF-Power-Meter to measure the test level as well as forward & reverse power, 4kHz – 1.2 GHz
• Directional Coupler
• Comfortable control software

As a „stand-alone“ test system the CIT-100 is convincing by its easy and comfortable handling and the excellent cost-performance ratio.

We also offer the full range of coupling/decoupling networks (CDN’s), EM-coupling clamp, BCI- and current clamps.

For more details about the CIT-100, visit the manufacturer’s website.

or download the datasheet (PDF).

CIT-1000

The CIT-1000 is a further development of the for years available and proven „CIT-10“, with the extended frequency range up to 1200MHz, stand-alone-operation via integrated Touch-Screen-PC as well as integrated directional coupler and power-meter for forward and reverse power measurement.

As usual with our CIT-series, all integrated instruments, like Signalgenerator, RF-Power-Amplifier and the 3-channel-RF Power Meter can be used as “stand-alone-unit”, too.

Hence, the Signal-generator and the RF-power-meter can also be used for radiated immunity tests acc. IEC/EN 61000-4-3. Furthermore an additional external RF-Power-amplifier could be connected to the CIT-1000 for this purpose.

For more details about the CIT-1000, visit the manufacturer’s website.

or download the datasheet (PDF).

PSG-300

The PSG-300 contains a linear precision power amplifier with a wide bandwidth (DC-300 kHz), suitable for all applications concerning fast alternating signals at high output power. The built-in generator provides sine, square and triangle waves. Communication between PSG-300 and PC is via USB connection. The application software is suited for general power generator applications and for immunity tests according to IEC/EN 61000-4-16 as well as to IEC/EN 61543. Short term tests are enabled by phase-controlled switching of an external power source (optional). The PSG-300 is equipped with a silent, temperature-controlled fan. Internal safeguards protect the amplifier from overheating and high-power dissipation. They also assure protection against short-circuits and overload.

The number one choice for all applications with the need for fast and powerful signals:

• Simulation of DC / AC supply lines
• Control of piezo actors
• Generation of magnetic fields with Helmholtz or similar coils
• Immunity testing according to IEC/EN 61000-4-16, IEC/EN 61000-4-19 AND IEC/EN 61543
• Calibration devices etc.

For more details about the PSG-300, visit the manufacturer’s website.

or download the datasheet (PDF).

MTS-800

The MTS-800 is a compact test system for broadband generation and measurement of magnetic fields. Its internal components allow automatic EMC tests according to automotive standards where high field strength need to be generated or measured.

In combination with our triaxial Helmholtz coils full automated susceptibility tests are possible at magnetic field strength up to 1000 A/m for frequencies from DC to 1 kHz. Lower field strength can be generated for frequencies up to 250 kHz. Due to the triaxial setup of our Helmholtz coil major improvement in device handling is achieved because there is no need to turn an EUT during tests.

Tests and measurements are controlled by a program which will set most parameter automatically. For any relevant standard, which are fulfilled by the MTS-800, limit values are already included into the software package, although any different value can be defined by a user. After every test full reports will be created automatically. Report layout is pre-defined, though any user-defined layout is possible. High performance is guaranteed by a self-calibration

Options

• Common mode test adapter for balanced signal and control connections according to IEC/EN 55103-3
• Calibration network for common mode test adapter according to IEC/EN 55103-2
• Current transducer for balanced video connections according to IEC/EN 55103-2
• Enclosed variable transformer for short term field according to IEC/EN 61000-4-8; prim. 230 V, sec. 0 to 230 V, max. current 20 A; incl. supply cable

Applications

• Magnetic Field Generation
  MTS-800 enables a user to generate strong magnetic fields up to 1000 A/m. Even alternating fields up to 250 kHz can be generated by the magnetic test system.
• Low Frequency emission and immunity tests
  acc. to MIL-STD 461, CE 101, RE 101, CS 101, CS 109 and RS 101. Individual software modules and hardware accessories are available for each of these tests.
• Automotive Testing
  Intensive testing is required for new products which should be used in any automotive application. The MTS-800 allows fast and easy testing according to many automotive standards as described before.

For more details about the MTS-800, visit the manufacturer’s website.

or download the datasheet (PDF).